Network View Specifics

Written By Mick Simpson ()

Updated at September 6th, 2023

Network View Specifics

The network view is the main view used in IMS. It shows network information with a focus on wireless technologies. As in the section “Choosing data visualisation options”, Assets and IP devices can be coloured by different values. Following is a specification of the different “Colour By” options and their associated colourings. If these colourings are not suitable for your suite, please contact FTP OTSC for help with customisation.

  • Connectivity
    • Green: 95-100% Connectivity
    • Yellow: 50-95% Connectivity
    • Orange: 1-49% Connectivity
    • Red: 0% Connectivity    
  • Latency
    • Green: <= 50ms
    • Orange: 51ms to 99ms
    • Red: >= 100ms
  • Noise
    • Green <= -95dBm
    • Yellow: -76dBm to -94dBm
    • Red: >= -75 dBm
  • RSSI (received signal strength indicator)
    • Green: >= -75dBm
    • Yellow: -84dBm to -76dBm
    • Red: <= 85dBm
  • Tx Rate
    • Green: >= 36 Mbit/s
    • Yellow (gradient): 1 Mbit/s to 36 Mbit/s
    • Red: <= 1 Mbit/s
  • Rx Rate
    • Green: >= 36 Mbit/s
    • Yellow (gradient): 1 Mbit/s to 36 Mbit/s
    • Red: <= 1 Mbit/s
  • SNR
    • Green: >= 15dB
    • Orange (gradient): 5dB to 15dB
    • Red: <= 5dB
  • SINR (LTE only)
    • Green: >= 12.5dB
    • Orange (gradient): 7dB to 12.5dB
    • Red: <= 7dB
  • RSRP (LTE only)
    • Green: >= -85dBm
    • Orange (gradient): -112dBm to -85dBm
    • Red: <= -112 dBm
  • RSRQ (LTE only)
    • Green: >= -6dB
    • Orange (gradient): -11dB to -6dB
    • Red: <= -11dB

See also: Infrastructure view specifics