v1.13.6 (2022-05-19)
NEW FEATURES:
Added support for OpenID Connect (OIDC) with the Azure AD OIDC provider
FIXES:
Fixed the error messages that appear when the user fails to log in. Now the error messages should reflect the reason for the failure, which will allow for more straightforward troubleshooting
CHANGES:
Added the ability for an IMS installer to hide the "Contact FTP", "Support Ticket", and "Feedback Survey" help links to allow customers to elect to handle their level-1 IMS support internally
POLLERS:
NEW - Huawei ETP48200 integration
Extended the WLC SNMP integration to show channel utilisation as a split of traffic and interference. Most WLCs will only offer this split for the 2.4 GHz channels
Extended the EFOY via Ensol EMI integration to collect error codes, error messages and temperature information
Extended the Rajant Breadcrumb integration to have alternate ways to infer trace information
Improved the reliability of next-hop data for the Rajant Breadcrumb integration
The IMS backend can be configured with a DNS refresh period setting. This controls how quickly IMS can respond to DNS changes when resolving IP Device hostnames
Fixed a bug with the processing of timestamps for the ESP-Tracbox integration
Fixed a bug with the collection of data throughput for the Linux network poller and added support for a new "ifconfig" format
Fixed a bug that would very occasionally cause an integration to stop returning data for any of the polled devices
Fixed a bug with the IMS agent integration where radio data would intermittently have gaps
v1.13.5 (2022-04-20)
POLLERS:
Fixed a bug causing unwanted pings to offline AVI UE devices in the AVI CCMS integration
Fixed a bug causing data processing errors for the WMI integration
Fixed a bug causing the notification emails to be poorly formatted for the Cisco WLC Deauther
Fixed a bug causing some integrations running in remote instance mode to have RPC errors
v1.13.4 (2022-04-12)
CHANGES:
Improved IMS backend performance
FIXES:
Fixed a bug where the Asset right-click context menu "Toggle Ignore Network Stats" did not cause any change in the child IP Devices' ignore stat setting(s)
Fixed a bug that would occasionally cause Assets and IP devices with custom forms to switch tabs without user input
POLLERS:
Fixed a label for the CAT NAM stats, RX AMP average *rate* has been corrected to RX AMP average *period*
Fixed a bug in the Cisco Switch poller that caused the "All Chipsets" visible radio display option to have no lines for Cisco Switch IP devices
Fixed a bug wherein the IMS server fails to parse data from the IMS agent
Fixed a bug causing loss of data for Minetec MineOffice integrations
Fixed a bug causing some IMS backend lookups to be incorrectly built
Fixed a bug that could obscure exception meaning in IMS backend logs
Fixed a bug causing loss of data from MSSQL stored procedures integrations
Fixed a bug causing duplicated radio MACs
v1.13.3 (2022-03-08)
CHANGES:
Improved IMS frontend performance
FIXES:
Fixed a bug with dashboard tab locking
Fixed a bug that prevented users from creating a new Asset using the Map right-click context menu
Fixed a bug that prevented the Infobox from showing data when selecting a Heat Map square in some situations
Fixed a bug where the Heat Map panel settings were forgotten when the panel was collapsed and expanded
Fixed the integration search widget on the integration tab in the Asset and IP Device panels
POLLERS:
Fixed a bug parsing data in the TriStar solar controller integration
Fixed a bug that occasionally stopped data processing in the AVI CCMS integration
Fixed an issue where the OpenWRT poller would sometimes not correctly detect the hostname
The WLC SNMP polling engine can now be configured to get GPS locations using the MIB files "wappMeshMIB" or "wappApMIB" so that IMS can support a broader range of WLC models and firmware
v1.13.2 (2022-01-07)
CHANGES:
The Infobox description field for Zones will honour new line characters
FIXES:
Fixed a bug that caused the bottom drawer dropdown to be anchored away from the bottom drawer
Fixed a bug relating to GPS parsing for the IoTBox integration
Fixed a bug that caused some pollers to ignore auto-integrations for assets
Fixed a bug relating to the handling of some non-number values in the Wenco DB integration
Fixed a bug that caused errors in the browser console on clicking an asset or IP device
Fixed a bug where some integrations would not return data if DNS lookups failed
Fixed a bug that could render an IMS frontend session unworkable if a view component definition was invalid
Fixed a bug where the zone history point ordering would sometimes be incorrect
Fixed a bug where Stat Browser filters could be on, but the filter widget could be hidden from the user
Other small fixes and tweaks
POLLERS:
Extend MSSQL database location integration to include execution of stored procedures
Extend MSSQL database location integration to support iVolve through the use of a stored procedure
v1.13.1 (2021-12-15)
NEW FEATURES:
Added a configurable Asset label view component
FIXES:
Improved the performance of the backend
Improved the performance of the Stat Browser
Fixed a bug that stopped invalid Triggers from becoming marked as invalid
Fixed a bug where Trigger filters were not selectable for IP Device Log fields
Fixed a minor display bug when attempting to open a deleted Zone from the Activity Tab
Fixed a bug when bulk updating Integrations on Assets or IP Devices
Fixed a bug where read-only users were logged out when requesting to hide the IMS survey
Removed the non-functioning "source" filter option for location stats in the Stat Browser
Fixed an issue where IMS would not work with secure web gateways e.g. NetScaler
Fixed an issue where the RF transmitter list would not show anything once a filter was applied
Fixed the "revert" button on custom forms
Fixed the filtering on the Stat Browser for IP Device Logs
Fixed a problem where the location information in the Asset and IP Device panels would disappear
Fixed an issue where RF transmitters attached to Assets with no locations would be drawn in a nonsense location on the globe
Fixed an issue where the data source dropdown on the bottom draw charts would sometimes float far above the charts
Other small fixes and tweaks
POLLERS:
Extended the Cisco IR829 integration to collect location stats
The AVI UE SSH integration will now detect and accept a wider range of interface names
The WLC SNMP integration will now detect client radios on the network, IMS can use this information to make clever polling decisions
Improved the detection and rejection of bad GPS locations in the Redline integration
v1.13.0 (2021-11-01)
NEW FEATURES:
Better filtering support for the Stat Browser; you can now filter by Asset, Asset Type, IP Device, IP Device Type, Tag, Zone and Zone Type where applicable
Support for 10 Log 10 fields with 10 Log 10 Mean and 10 Log 10 Sum aggregations available across Heat Maps, Charts, Map View and Triggers
Support for Sound File fields
Dashboard items showing Zone related data can now be grouped by Zone Type and All
Added a Fly To IP Device button in the IP Device edit panel
Heat Maps can render based on vectors when available
Added vector visualization support
CHANGES:
Modified the backend to have a smaller memory footprint
The old Heat Map "grid resolution" option named "Very high - large dots" has been removed due to the confusing name
Heat map "grid resolution" replaced by "grid size". The option mapping are as follows:
- Very High -> X Small
- High -> Small
- Standard -> Medium
- Low -> Large
- Very low -> X Large
Heat map "grid size" now supports a new smaller size, XX small
Clear login error message when an Active Directory managed user is not in any valid groups
Redesign of the Asset, IP Device and Ticket conflict resolution user interface which appears when 2 different user sessions edit the same item
The bottom draw charts now have render with sub-groupings enabled by default, given that the selected datasource contains a subgroup
Closing a new, unsaved Asset, IP Device or Report will now warn the user about losing unsaved data
Help links now point to a new online help guide
Stat Browser data selector is now searchable
Allow loading data into the app in smaller or larger chunks depending on application configuration which can improve loading times
Expired licenses will now restrict creating Assets, IP Devices and Integrations
Removing the default TX height from RF Transmitters, so the Asset height is used by default if attached
Timestamps in the Activity tab are now clickable. When clicked, the application time will jump to the clicked timestamp
Allow 1 second chart aggregations when applicable
Fixed Total Utilisation and Utilisation chart values
When viewing a KMZ in the app, unknown images will be displayed as a default marker icon
Dashboard item values will now round to 2 decimal places
FIXES:
Fixed floating Assets when toggling terrain on and off
Fixed guest mode login
Fixed the accuracy of the triggering/alerting time windows
Fixed a bug where the bottom draw would occasionally display the wrong chart
Fixed Filter Zones not being editable
Errant location data at (0, 0) will no longer be recorded
Fixed opening panels for deleted objects not working
Fixed deleted objects showing in the Stat Browser
Fixed some issues with browser caching
Fixed dashboard post aggregation filtering not working for tables
Fixed downloading JPEG images
Fixed numeric rounding inconsistencies in the infobox
Fixed inconsistencies with All grouping in dashboards
Fixed issue with ordering of imagery layers
Fixed Path Profiling occasionally displaying incorrect latitude/longitude values
Fixed issues with the Web App in offline mode
Fixed not showing a prompt when closing a panel with unsaved changes
Fixed dashboard item tooltips when viewing IMS on a mobile/touch device
Fixed an issue where IP Device Log service name and log file name columns would not appear in the Stat Browser
Fixed stats from deleted Assets and IP Devices appearing in Heat Maps
Fixed an issue with read only users being logged out when performing write commands
Fixed the "All" grouping dashboard option to include orphaned IP Devices
Fixed an issue which stopped the WLC deauther from running
Fixed an issue where the WLC SNMP integration would assign the same mac address to the 2.4 GHz and 5 GHz radio interfaces on APs
Other small tweaks and fixes
POLLERS:
NEW - Ports Vessel Location Poller
NEW - Ports Vessel Movement (Berth Booking) Poller
NEW - Ports Vessel Metadata Poller
NEW - Ports Weather Poller
NEW - Ports Berth Metadata Poller
NEW - Norsonic Nor145 Measurement Poller
NEW - Norsonic Nor145 Recording Downloader
NEW - Norsonic Nor145 Calibration Scheduler
NEW - Huawei CE Switch integration
NEW - MineTec MineOffice API integration
NEW - Acksys radio integration
Extended the Nokia SAR7705 integration
AVI CCMS stat listener can correct SINR values when all AVI UEs are using the Telit chipset
The Syslog integration now supports a configurable filter to reduce the noise in recorded syslog entries
Cisco Switches which report multiple interfaces with the same MAC address will now have an index on the end of the MAC to differentiate the interfaces
Cambium PTP600 now uses "unit name" as default IP Device name, and supports polling over HTTPS
Cambium PMP450i integration no longer records RX rate as the value was misleading
Improved the general fault tolerance of data consumption when invalid data is produced
The WLC SNMP integration now honours the admin status and operational status and does not create data for the radio interface when it is configured to be "disabled" or "down"
v1.12.3 (2021-07-22)
CHANGES:
The Infobox for a connection line will now clearly display "No Data Available" when there is no data
The Infobox for a connection line will update faster when the timeline is paused
When creating a new RF Plan, users will have the option to edit the RF Transmitter Template in the Bulk Creating RF Transmitters panel
When using LDAP authentication, IMS login will fail if a valid LDAP group does not authorize the user. Previously the user would be able to log in but would have no read access
Added a loading spinner when opening and loading the IMS web application
FIXES:
Connection lines now correctly honour the Asset Map Options -> Include Ignored Stats setting
Fixed an issue when SNMP polling devices that did not support the "sysName" OID
Fixed a regression with guest mode access
Fixed the save and revert buttons on certain custom forms
Other small fixes and tweaks
POLLERS:
NEW - FrontRunner API location integration
The AVI CCMS integration will timestamp data according to the most recent out of the AVI system timestamp or the AVI GPS timestamp, which should provide a more reliable timestamp than relying on a single source
The Dispatch 6 DB integration can now optionally take into account the "delay" state for poll/not-poll IP device decisions
Improved the BULKSNMPWALK implementation
Improved handling of errors when polling the MineStar Data Share API
Fixed the Cambium PTP600 integration parsing for the host mac address field
v1.12.2 (2021-06-10)
FEATURES:
Added support for sending SMS alert notifications via the SMSEagle hardware SMS gateway
CHANGES:
Asset Tag and IP Device Tag are now filterable items for the "Connections As Client" and "Connection Distance as Client" Dashboard Item data sources
FIXES:
Fixed a bug where comment panels were un-scrollable
Fixed a bug where map layers required a show/hide toggle for them to render correctly
Fixed a bug where specific reports would fail to run
Fixed a bug where too many Activity Page rows would slow down IMS performance
Fixed a bug where Assets would occasionally disappear from the map when zooming in
Other small fixes and tweaks
POLLERS:
NEW - NetModule NB1600 series UE integration
Fixed the Cisco WGB integration occasionally over-reporting utilisation due to the WGB un-expectantly reporting zero for byte counters
v1.12.1 (2021-05-05)
FIXES:
Fixed a bug where the scroll position of the Stat Browser would reset after a data refresh
Some small tweaks and fixes
CHANGES:
Improved reliability of the clock drift check between the IMS server, the browser and the internet (if the internet is available)
POLLERS:
Added collection of daily float time to the TriStar MPPT integration
v1.12.0 (2021-04-19)
NEW FEATURES:
MAJOR: IMS now has a licensing feature to control subscriptions. Please contact us for more information on how this feature will affect your installation
MAJOR: Assets now have a height value used in RF Planning to assign an RF Transmitter height automatically. An Asset's default height is defined by its' Asset Type but can be manually overridden
MAJOR: Assets and RF Transmitted heights are now visualised to scale in 3D mode
The source of location stats are now shown in the Infobox and the Stat Browser
Tickets can now be associated with many Assets, IP Devices and Zones
Added the ability for charts to group by a dynamic stat's subgroup
Added tiered measurement units for dynamic stats, which will allow adaptive displaying of data. E.g. When displaying area, the value will display as cm2 for small values and km2 for very large values
Charts will now handle datasets with a very small Y-axis range
Dynamic stats can now store low resolution/thumbnail images
Reports can now be configured to run with a custom frequency
Tickets can now be filtered by archived / not archived / both. Previously only archived / not archived filtering was available
Assets can now be created directly on the map by right-clicking on the map and choosing "Create Asset here"
Added a "Marker Pin" asset type. These can be directly created on the map by right-clicking on the map and choosing "Create Marker Pin here"
The Integration lists in the Asset and IP Device panels can now be filtered
FIXES:
Fixed a bug in the Asset Map Options when grouping by IP Device tags where filter text did not affect untagged IP Devices
Users are now able to chart IP device stats and radio stats for orphaned IP Devices
Fixed a bug where a newly created Zone label would not display if the timeline was paused
Other small tweaks and fixes
CHANGES:
The user is now notified if the browser detects a clock drift between the IMS server, the browser and the internet (if the internet is available)
More entries are now visible at once in dropdown selectors
Improved Zone drawing performance on the Map
Most large dropdowns in IMS have now been replaced with a filterable dropdown widget
Pollers can now be configured with a named time zone (e.g. Australia/Perth) instead of a fixed offset. Correctly configured pollers will then react automatically to daylight savings
There is now a "comments count" row for Assets and IP Devices in the infobox. Clicking on this count will open the comments panel for that Asset or IP Device
LDAP querying performance has been greatly improved
The Heat Map "filter data" section now has clear input validation
The Heat Map "filter data - matches pattern" option now applies the filter text as a regular expression for string fields
The Heat Map "filter data - contains" option has been simplified to check whether the filter text can be found in a string field
All stat columns are now heat-mappable. By default, the data points will be drawn as white squares
The Asset and IP Device integration tab has been redesigned into collapsible rows for the "Recommended" and "Other" integration categories
General backend stability improvements
Other small changes and improvements
POLLERS:
Added Cisco WLC SNMP integration
Added Huawei HiLink integration
AVI UE SSH integration now records GCID, PCID and band
Reworked the CAT Network Access Monitor Listener integration to record richer data using "NAM Stats"
Reworked the Wenco FMSDB integration to record "Octagon Stats" instead of using a legacy data model. Note there are no new data fields
Implementation of BULKSNMPWALK in some integrations for improved performance
Deprecating MPPT polling via modbus over HTTP
v1.11.5 (2021-04-15)
POLLERS:
Improved Ubiquiti LiteStation2 poller to be more tolerant of poor connectivity
The AVI UE SSH poller now produces AVI UE stats which records LTE band, GCID and PCID
v1.11.4 (2021-03-26)
NEW FEATURES:
Added Minetec Bridge Unit IP Device Type
Permit an "any" option for Asset Type and IP Device Type when bulk creating RF Transmitters
Support for overlaying a simple image on the map
FIXES:
Fixed Heat Maps not filtering by the selected site
Fixed IP Device Logs not filtering by the selected site
Fixed handling of an errant Bing Imagery request that could cause the map background to appear black
Fixed AVI CCMS data forwarder occasionally missing data
Fixed handling of missing GPS data in Redline poller
Fixed timestamp parsing of syslogs sent from AVI UE devices
Fixed a bug where some invalid triggers were not being marked as invalidated
Fixed ordering of Dashboard items when viewing a Report
Fixed SNMP Version poller not collecting specific formats of serial numbers
Fixed AVI UE SSH poller not accepting ETH interfaces
Fixed a bug where count-type Triggers were not showing their results in the UI
Fixed an occasional error when turning on some integrations
Fixed OpenWRT poller interface parsing
Fixed Dispatch 6 database queries
Fixed Radwin poller detecting if the device is a master or a slave
Fixed Redline RX and TX throughput values
AVI poller now uses a default PCID of 0 if not received from CCMS
Fixed timestamping of ping results when radio data results were delayed from CCMS
Improved reliability of DNS lookup when polling by hostname
The configured terrain detail level is now applied to path profiling
Other small tweaks and fixes
POLLERS:
Added Ensol EMI v2 poller to support the latest firmware
Added Minetec VPC log scraper
Added Uptime stats and PCID fields to AVI CCMS listener
Added MineStar Underground Cycle poller
v1.11.3 (2021-01-05)
FIXES:
Fixed Heat Maps when filtering by radio or string fields
Improved stability of the IMS email service
Turned off nested LDAP integration by default because of performance issues in large AD environments
Fixed IMS-QL using the incorrect link between stats and Assets/IP Devices
Other small tweaks and fixes
POLLERS:
Updated SCADAPack integration to support 2 EFOY devices being connected at once
Added AVI UE LTE Band Stats to record the LTE band being used by AVI UE devices
Changed LiteStation2 integration to record radio channel instead of radio frequency
Fixed Cisco integration from recording Port Channel interfaces as well as physical interfaces which was causing changing MAC addresses in IMS
Improved stability of OpenWrt integration
Fixed Radwin integration using the wrong OIDs for TX power, channel and RSSI
v1.11.2 (2020-12-07)
CHANGES:
Improved backend CacheServer performance. Sites with a large number of devices and/or using DNS should see an improvement.
FIXES:
Fixed regression where the default "color by" option for an Asset or Zone used the base color for the Asset or Zone. Now the default is the first "real" stat field in the drop down
Fixed regression in the Activity Page where the user was not able to filter by an individual IMS object, e.g. Asset or IP device
Fixed an issue where polling Ubiquiti AirOS devices would produce duplicate radio stats for the same MAC address when a sub-interface was present
Fixed an issue where the Radwin integration would sometimes not form links between a HSU and a HBS
Fixed Aviat integration collection of min TX power and max TX power values
Fixed an error that occasionally occurred when the connection between the browser and API was not reliable
Fixed link quality colouring for the Cambium integration
Fixed some incorrect data values for the EFOY via EMI integration
Fixed the BreadCrumb integration so that it collects partial data, instead of no data, if the BCAPI trace operation fails
Other small tweaks and fixes
POLLERS:
NEW - Solar controller via Eltek Smartpack integration
AVI CCMS integration now has the ability to use band plus PCID information to identify a base station
AVI UE SSH integration now collects RSSI information
v1.11.1 (2020-11-06)
NEW FEATURES:
MAJOR: Base Colours for Assets, IP Devices and Zones are now user configurable. These colours are used in charts and reports, and for some stats, and are able to be displayed on the map
Added clickable links to Assets, IP Devices, Interfaces and Zones in the infobox to allow them to be easily viewed
Added the ability to alert on strings (text) in aggregate triggers via a new condition type of 'any row' and matchers of 'regex', 'contains', 'does not contain' and more
Path Profile panel now displays distance in the chart tooltip
Path Profile panel now displays azimuth, elevation and distance for line segments
Path Profile panel now displays latitude and longitude for points
Added better imagery support for WMS v1.1.0 and v1.1.1
It is now possible to add only new transmitters that match a filter to an RF Plan, rather than all transmitters
The radio stat dropdown order for the bottom draw charts can now be reconfigured by FTP
Added the ability to filter by foreign keys in Heat Maps for some stats
Empty datasets can be removed from charts (enabled by default) to improve the readability of the tooltip
CHANGES:
Prevent system names from being selected when double clicking 'show disabled' in the integration panel
No longer show field name for location count Heat Maps since it doesn't make sense
Improve performance of the CacheServer backend process to reduce server load
Improved resiliency of SSH connector for high latency servers
Dropdowns/selectors are now sorted alphabetically throughout IMS
Added icons to various buttons around IMS
Significantly improved the performance of IMS when there are a large number of Zones
Improved synchronisation of RF Plan changes between IMS sessions
Heat maps will now better handle poor connections while loading data and will automatically retry at the data 'chunk' level
Minor improvements to IMS Imagery Server
If a Heat Map hits the fetch limit it now uses an orange warning colour rather than a red error colour
Improved trigger support for stats with a Zone parent
Added Interfaces and Tags to the audit log
Improved the performance of post-aggregate dashboard item filters
The "fly to" button in the Asset panel has been changed from a button to a link
Other small changes and improvements
FIXES:
Fixed an issue that could cause a delay when toggling zone visibility if the timeline is paused
Fixed a few stability issues with frontend help tours
Fixed a display issue where Trigger placeholder text could be cut off
Fixed an issue that could cause the frontend to crash when entering a new location via text input
Made a number of small bug and stability fixes to RF Transmitters
Fixed an issue that stopped center panel items from being re-orderable by dragging
Fixed an issue that caused the initial rotation/height of the site view to ignore custom configured values
Fixed an edge case in transition triggers that would occasionally cause them to hold onto old data
Fixed an issue that stopped the user from being able to horizontally scroll the infobox with a large number of selected assets
Fixed an issue that displayed 'Failed to save integration' when toggling integrations for Assets
Fixed an issue that could stop you being able to clear a date/time selector in tickets and save it
Fixed an issue that caused the chart legend panel to display 'page 1' no matter which page you were on
Grouping by 'All' for a dashboard table no longer errantly displays an 'unknown group' table header
Fixed an issue that caused the user to be unable to save a new parent problem for an incident ticket
Other small tweaks and fixes
POLLERS:
NEW - Added a Huawei eSight integration for alarms
NEW - Added an Aviat integration for alarms
NEW - NEC iPaso integration
NEW - Trimble BX992 integration
NEW - EFOY via Ensol EMI integration
NEW - Motorola MOTOLOCATOR Location Tracking solution integration
NEW - Solar Charger via Victron Energy Controller integration
Aviat poller - No longer requires web scraping and now runs purely off SNMP
Aviat poller - Added many new types of data
Adding support for running the Cambium PTP820 in multi carrier ABC mode
Changed the AVI UE SSH poller to get cell data by a more efficient means (ubus instead of atmon)
Added support for polling MSSQL databases via an encrypted connection
Some fixes for SCADAPack EFOY polling
Made several improvements and bug fixes to the Rajant Breadcrumb poller
When a Redline device reports 0dbm of noise it is now recorded as null
The MAC assigned to a Redline radio interface is now guaranteed to be unique
Other minor poller bug fixes and improvements
v1.11.0 (2020-09-02)
NEW FEATURES:
RF plans can now have transmitters bulk added and deleted after the plan has been created
Bulk added transmitters are now created based on the selected RF Plan's transmitter template
RF plans for Cisco WAPs now honour disabled radios (no longer need to edit RF transmitters to reflect this)
Removed requirement for large TCP port range to support poll/not-poll IP device decisions based on asset location stat recency (simplifies firewall flows for most distributed IMS deployments)
Improved IMS database storage efficiency
Improved performance of automated database maintenance
Integrations for IP devices are now filtered down to a "recommended" list by default
CHANGES:
Added new icons to a few areas around IMS such as the RF Planning panel
Added better invalid and changed form messaging to the Admin page
Added in-progress spinner and save button disabling during saving to the Admin page
Improved keyboard data entry for the date/time widgets when editing Reports
Other small tweaks and improvements
FIXES:
Fixed charts aggregated by count incorrectly showing the unit of the data source
Fixed Ubiquiti AirOS SSH polled devices reporting incorrect IP when IP-aliases are configured
Fixed Z-offset for path profile anchors not appearing above assets at some zoom levels
Fixed zone labels disappearing beneath the terrain when in 3D mode
Fixed some data sanity issues with SCADAPack devices on Simark trailers
Fixed Cisco WGB MCS rate index mask handling
Fixed triggers sending out duplicate alert emails
Fixed IP devices refusing to accept / overwriting user changes to IP and MAC for some pollers
Fixed insane data on Telnet / SSH timeout due to internal buffer not being reset on disconnect/reconnect
Fixed changes to terrain providers not honouring configuration changes within the user's browser session
Fixed regression wherein units did not appear on charts
Fixed some date/time inputs ignoring numeric keypad keystrokes
Fixed failure to create statistics for PTP820s when ethernet interface is down (e.g. polled via RF interface)
Fixed handling of MineStar API integration being unable to access the operator endpoint
Fixed triggers incorrectly including latest stat before the time window for non-state stat types
Fixed the API admin interface for updating IP Device Type configurations
Fixed the display of location stats in the infobox
Fixed the display of solar controller stats in the infobox
Other small tweaks and fixes
POLLERS:
Added support for generating dynamic stats from data adjacent to location data in MSSQL databases
Added support for polling Nokia 7705 LTE UE devices
Improved RAD / Radwin PTP + PtMP polling efficiency and fixed some data sanity
Added support for polling Cisco WGB uptime and version
Added support for polling Cisco IR829 LTE UE devices
Added support for polling AVI LTE UE devices directly
Handle occasionally insane TX power values reported by Ubiquiti AirOS polled devices
Improved Redline polling efficiency and added additional data fields
v1.10.1 (2020-07-03)
CHANGES:
Improved backend performance when polling large numbers of devices
FIXES:
Fixed the RF Plan name input to invalidate on a blank name
Fixed activity log entries for bulk Asset and IP Device deletions
Fixed the tx/rx link rate calculation for the Radwin 5000x poller
Fixed an issue that could cause RF Transmitters to not be properly cleaned up when an RF Plan is deleted
Fixed some occasional parse errors in the Fluidmesh poller
v1.10.0 (2020-06-19)
NEW FEATURES:
MAJOR: Added the ability to hide results in dashboard items based on filtering the final data
MAJOR: Added the ability to filter Heat Maps by any field in the specified stat
MAJOR: Location data is now available to color by and Heat Map
The Stat Browser CSV export feature now allows exporting a much larger number of rows much more quickly
The Stat Browser is now considerably faster, and shows many more rows by default
The Stat Browser now displays the number of rows that loaded
The Stat Browser now has location stats available for browsing
The Stat Browser timestamps are now clickable and jump IMS to the displayed time
Added time zone to CSV exports
Colored indicators now appear in the infobox matching the map icon
Added selectable pixels per Km resolution for RF Plans
Added a spinner to indicate that the on-click RF Plan is generating
Added the ability to enable a black outline for connection lines to improve visibility via the admin page
Added 'cost' to both connection line coloring and the connection infobox (where relevant)
Added support for unicode MAC addresses in SNMP Traps
Improved trigger performance in certain cases
Reduced the performance impact of having RF Transmitters visible
The connection distance charts now exclude mobile devices that have data more than 90 seconds old
The manage tab is now more performant
Added the Heat Map resolution option, which controls the size of the underlying Heat Map grid and the size of the Heat Map dots drawn on that grid
CHANGES:
Added a warning for high terrain detail levels
Chart tooltips are now ordered by value for easier viewing
Charts will now show tooltips for all groups up to a max of 50 - previous max was 12
Improved backend performance when polling large numbers of devices
Changed vertical chart lines indicating current time to dashed lines for clearer differentiation
Changed 'MW' to 'MILLIWATTS' in RF Planning Transmitter UI
The RF Plan generated toast will now tell you if it had to automatically lower the pixels per km resolution for performance reasons
Improved support for hostname resolution for sites using DHCP
Moved 'List Overview' to the top of the manage page view options
A warning is now displayed when hitting the max number of tabs in the dashboard
Throughput now defaults to bits instead of bytes
The trigger UI option for "Include inactive radio stats" has now been INVERTED to be "Only alert if Radio is known to be uplink" for clarity
Select filtered is now additive in the manage page (i.e. it now functions like the quicklist) for consistency
The Asset Mover now allows you to drag the map without placing the new Asset location
Improved the 'last seen' auto-polling logic
When 'Visible Radios' is set to 'Selected' it now shows nothing when nothing is selected instead of all
Comments now update in real time as new comments are added
The 'max rows' input in the Stat Browser no longer clamps to the nearest 25
Removed the Heat Map -> Aggregation -> None option as it was misleading. This legacy functionality can be accessed with Heat Map -> Resolution -> Very Fine - Large Dots
Improvements to various help panels around the place
Bulk delete in the manage tab is now more stable for deleting large numbers of assets, and has improved performance
The backend is now significantly faster at processing location data
The radio dropdown in RF Transmitters now shows the parent IP Device in parentheses if the radio name is not clear
Tweaked style of center panel expand/collapse bars to make scrolling via the scrollbar easier in the left panels
Other small UI tweaks and improvements
FIXES:
Fixed an issue that could cause RF Transmitters to 'jump around' on the screen with 3D mode enabled
Fixed an issue that could cause the datetime picker in the utility bar to be cut off
Fixed a regression that removed the prompt to confirm not saving a new tag
Fixed some stability-related bugs with reports
Fixed an issue that could cause pollers to sometimes become 'stuck'
Fixed an issue with the share link not sharing the camera position
Fixed an issue that caused indicators to not immediately show when using a share link
Fixed an issue that stopped you from editing Zone descriptions
Fixed an issue that caused Zone labels to be incorrectly offset on very small zones
Fixed an issue that could cause Priority and Status fields to be blank when creating an incident from a problem ticket
Fixed an issue that caused tags not to be visibly synchronised between IMS windows unless you closed the asset and re-opened it
Fixed ANT file URL in RF Transmitters
Fixed several issues with Firefox, which is now a supported Web Browser
Fixed an issue that could cause the time to display as 24:xx instead of 00:xx
Fixed an issue that could cause too many items to appear in an Activity tab
Fixed a few bugs with Redline polling
Fixed an issue that would cause Fluidmesh devices to occasionally report 0 RSSI
Fixed incorrect throughput scaling for Fluidmesh devices
Fixed a rare issue that would occasionally prevent you from re-duplicating a duplicated dashboard item
Fixed a memory leak that occurred with constantly failing MS SQL connections
Fixed an issue that could cause stats with deleted Asset/IP Device parents to show in the Stat Browser
Fixed an issue that would cause the activity page to now allow users without admin permissions to filter by user
Fixed an issue that could cause an invalid map layer to stop other map layers from loading correctly
Added back missing MIB files for improved SNMP Trap support
Fixed a performance issue with Heat Maps when 'Limit location interpolation' is disabled
Other small tweaks and fixes
POLLERS:
Added support for polling Ubiquiti airFiber devices
Added support for polling Rajant Breadcrumb devices
Added support for polling SCADAPack devices on Simark trailers
Added support for 16 bit floats on TriStar MPPT devices
The Redline poller now pulls various new fields such as burst rate
The Cambium poller now pulls various new fields such as frame utilisation
Improved OpenWrt polling support
Moxa Trimble pollers now use system time instead of GPS time by default to work with old firmware
Improved stability of IP Address scraping on Ubiquiti devices
Improved Ubiquiti AirFiber polling support
Improved Fluidmesh polling support for newer firmware
Other minor polling bug fixes and improvements
v1.9.0 (2019-12-19)
NEW FEATURES:
MAJOR: There is a new Trigger Action that lets the user specify an Alert to be auto acknowledge after a configurable amount of time
MAJOR: Improved FTP IoTBox support - Auto-add and the ability to control devices through IMS
MAJOR: Dynamic forms - IP Device Type and Asset Types can now be extended for custom data input
MAJOR: New 5 min rollup level for network stats - charts from 6h-48h should be considerably more performant at higher granularity levels
IMS now supports nested groups for LDAP authentication
The Asset Type field in the Asset panel is now searchable
The IP Device Type field in the IP Device panel is now searchable
Current selections and 3D mode are now included in the 'share URL'
Heat Maps now have a loading bar to indicate generation progress
Stats can now be displayed against zones
There are 2 new vertical lines on line charts to give a point of reference when working with multiple charts. The blue line shows the current IMS application time. The grey line will follow the mouse cursor.
There are now Problem Tickets and Incident Tickets. Problem Tickets can be used to group Incident Tickets together
Assets can now be coloured by Asset Type on the map
Assets can now be labelled by Asset Type on the map
Assets can now be labelled by stat value on the map, e.g. Connectivity
Imagery layers can now be excluded from the Map Layers List
Asset Options, e.g. "Color By" will be remembered for each View
Activity log now includes changes to integrations and reports
Reports can now be un-deleted
CHANGES:
IMPORTANT: Battery voltage and panel voltage are now separate data sources and will require separate charts. Existing 'Voltage' charts will display battery voltage. A new chart will need to be created for panel voltage.
IMPORTANT: Some asset-level integrations are now automatically enabled/disabled as required (can be manually overridden)
The maximum count of time slices for a chart has been increased. This allows higher granularity charts over a longer time period
When using IP Device hostname to specify the address of an IP Device, the IP field will update with the resolved IP address
The user will be warned if an IPv4 address is entered into the Host field for an IP Device
The measuring tool is now accurate down to 1 meter
Increased default framerate from 40 to 60 FPS for the Map
Panel resizing has been improved
Improved consistency of button styling
The report panel has improved input validation
Improved the performance of the Manage Asset and Manage IP Device tables
Asset and IP Device panels prompt the user if they have outstanding changes on the General or Integrations tab
Text labels on the Map now have a thin black border which allows them to be seen more easily on light coloured backgrounds
The Trigger Alert History now has several fly-to buttons for an improved user experience
The IMS help wiki has been deprecated, links now point to the IMS Quickstart guide
The IMS API has now been split up into various worker groups to substantially increase the resiliency of IMS under extreme load
Improved performance of bulk updating integrations on manage page
Improved performance of table views on manage page
Other small UI improvements
FIXES:
Fixed a rare bug that could cause the application to fail to load, and require a refresh
Fixed a display bug in the RF transmitter list
Fixed a date display bug in the Asset 'update location' panel
Fixed a display bug in the Stat Browser
Fixed a bug when creating new Zones
Fixed a few small bugs with the measure and path profile tools
Fixed a bug that would cause stats to get thrown away if there were negative packet counts
Fixed a bug with multi-site IMS instances that could cause Assets/IP Devices to change site unexpectedly
Other small tweaks and fixes
POLLERS:
Added support for polling Ubiquiti LiteStation2 devices
Added support for polling Cisco 350 AP devices
Fixed an issue that caused occasional errant panel/voltage data from TriStar solar controllers
Fixed a bug that applied a wrong timestamp to syslogs that did not contain their own timestamp
Huawei AR503 poller now collects additional LTE fields; RSRP, SINR, RSRQ
Added support for WGB MCS rates
Improved Cisco WLC polling performance when polling large numbers of devices
Cisco WLC AP polling is now more resilient
Added a sanitisation process to filter out extremely high or low errant temperatures from a TriStar MPPT
Improved the EFOY Fuel Cell poller accuracy
Other minor polling bug fixes and improvements
v1.8.5 (2019-08-13)
CHANGES:
OBDBox will use the server's time if the time from the device is unreliable
FIXES:
Fixed an issue where the measuring tool would still be enabled when selecting RF Planning
Fixed a bug that caused the Cisco WLC polling to fail to parse channels
Fixed the automatic report generator occasionally capturing a loading spinner when generating a PDF
Fixed the handling of required fields when configuring map layers
Fixed handling an issue that occasionally caused the RF Plan list to not load
Other small tweaks and fixes
v1.8.4 (2019-08-13)
Text changes
v1.8.3 (2019-07-03)
NEW FEATURES:
Added the ability to select the data point limit for Heat Maps via a dropdown
An email is now automatically sent out to everybody in the contact list for a trigger if it is invalidated
Read only users can now create and edit their own dashboards
Added the ability to relate syslogs to devices via a MAC address lookup rule
CHANGES:
Changed default asset data type for the network view back to connectivity from latency
Removed the 'disable trigger' button from the alerting triggers top bar dropdown. This is to stop accidental disabling
A warning will be displayed if you set the start timestamp to be after the end timestamp in chart filters
You will now need to confirm removing dashboard items. This is to stop accidental deletion
Terrain and imagery should load about 20% faster in IMS
Improved the measuring/path profiling tool UI
Changed wording of 'local time zone' to 'browser time zone' in the top bar to avoid confusion
FIXES:
Fixed a bug that could cause the IMS frontend to hang or crash when de-selecting a connection line
Fixed a rare issue that could cause the database to be unable to write network stats
Fixed being unable to view all tags when there were a large number in IMS
Fixed a bug that caused the 'show offline' setting to not always work properly
Fixed a bug that caused packet stats to be excluded from the infobox when selecting a Heat Map square
Fixed a bug that caused storage and process stats to be rolled up with less granularity than desired
Improved IMS's tolerance for out-of-sync timestamps between the frontend and the IMS server
Improved stability and reduced impact of IMS imagery server when processing terrain
Fixed a bug with the camera page that could cause cameras to be double-displayed when reloading
Fixed a display issue in comments when adding files
Other minor fixes and tweaks
v1.8.2 (2019-04-15)
FIXES:
Fixed a bug that stopped SNMP traps and Syslogs being written to an IP Device Log entry
Fixed a bug that stopped Heat Maps from drawing for null locations
Fixed a bug that stopped the Cisco Switch poller from identifying VLANs
Fixed a bug in triggers where an OR statement at the root of a trigger's query would result in an incorrect query
Other minor fixes and tweaks
v1.8.1 (2019-03-28)
FIXES:
Fixed a data migration issue that caused more devices to be polled
Fixed a bug recording syslog data when the syslog did not contain a timestamp
v1.8.0 (2019-02-28)
NEW FEATURES:
MAJOR: Brand new Heat Maps 2.0. Heat maps now support:
- Selecting Heat Map squares to view stat data breakdown
- Longer and newly customisable Heat Map timeframes
- New 'no aggregation' option to display raw data
- Option of disabling large-scale interpolation
MAJOR: Imagery layers and terrain layers are now configurable from the front end for IMS Managers
MAJOR: Added path profiling! Accessible via the measure tool
MAJOR: Radio interfaces are now visible in the new interfaces tab for IP Devices
Dynamic stats data can now be added to the network view
Added Asset and IP Device counts to manage page panels
Significantly improved support for LTE monitoring
Deleted comments now show the created timestamp if you expand them
Added a 'reset all local settings' button, it can be found in the same dropdown as the logout button
CHANGES:
IMPORTANT: Users that are a member of the IMS 'manager' group will now also have read/write access
MAJOR: Removed 'poll even when offline' option from IP Devices, and added it to relevant integrations. In the case of a integration for a polling engine without the ability to check for online state AND where that integration's IP Device poll even when offline option was disabled, that integration will be disabled. This should preserve previous behaviour.
Fade hidden assets in the quicklist to make hidden assets more obvious
Locations no longer interpolate where there's a time difference of 10 minutes or more
Map Asset colouring dropdown options are now grouped by source stat type
Traffic light colours are now standardised across dashboard, aggregate table and map
Changed the default traffic light green colour to a slightly darker green
Changed the default traffic light yellow colour to orange
FIXES:
Fixed jumping to the last tripped trigger stat
Fixed a bug where map tooltips wouldn't show
Fixed a config limitation with dynamic stat colours
Fixed a bug that caused open assets and ip devices to not close when changing site
Fixed a bug that caused packets to now show in the map bottom draw
Fixed a minor issue with deleted assets remaining selected when bulk editing
Fixed a bug that could cause connections to not select properly in the map in rare cases
Fixed a bug with duplicate IP Device names causing chart items to overlap
Fixed a bug that caused the infobox to go off-screen horizontally when a large number of assets were selected in the map
Decreased IMS server disk IO load
Some backend stability improvements
Other minor backend performance improvements
Other minor fixes and tweaks
Comment counts now properly exclude deleted comments
Improved aggregate table stability
POLLERS:
Improved 3DP Hornet poller (rate & RSSI specifically) and added channel utilisation
Added the option of polling channel utilisation to Cisco WLC poller (off by default)
Fixed inaccurate Cisco WGB poller visible radio Tx rate
Improved Radwin polling support
Added support for polling Fluidmesh devices
Added support for polling AVI devices
Added support for polling Siklu devices
Other minor polling bug fixes and improvements
v1.7.10 (2018-12-14)
NEW FEATURES:
IMS now supports per-site timezone settings. Users can toggle between site timezone or their local browser time zone. Date/time input and display all over IMS will adjust accordingly.
BUG FIXES:
Various backend fixes
v1.7.9 (2018-11-21)
CHANGES:
To improve readability, dynamic stat rows in the infobox with a null value will be omitted instead of showing 'Unknown'. This change does not affect network or radio data
RF Transmitters attached to a radio will be orphaned if the radio's parent IP Device is deleted
Dashboard items that are exported to CSV will now have their timestamps in the site's timezone instead of UTC+0
Tripped trigger count in the top bar will now blink to make it more noticeable
BUG FIXES:
The infobox will now show 'Unknown' for SNR if either RSSI or noise data is missing instead of calculating an incorrect value
KMZ export now works properly with views based on dynamic stats
Fixed the ordering of map options
Fixed a bug where the location stat information in the infobox would not update when the time cursor was moved
Fixed a bug where csv exports were not being included in a report
Various other minor cosmetic fixes
v1.7.8 (2018-10-30)
CHANGES:
The stat browser no longer allows text filtering when showing the latest entry by parent. This change ensures fast data retrieval
BUG FIXES:
Fixed download CSV button availability on dashboard items
Radio / Connection SNR is now unknown if noise or RSSI is unknown
v1.7.7 (2018-10-08)
NEW FEATURES:
The Device Log tab has been replaced with the Stat Browser, which has more advanced functionality
Trigger stats can now be charted in the dashboard
Right clicking on the map now gives you altitude from the WGS84 ellipsoid
Comments can now be deleted (effectively hidden) on the frontend
Cesium Ion can now be used as a Terrain provider
Help (top right of screen) now includes tags for more powerful searching
You can now choose to colour radio stats such as RSSI by uplink, non-uplink and all in Asset options
A spinner will now show if you are uploading a file in a comment
When an email is sent out regarding a change being made to a ticket, it now includes the user that made the change
CHANGES:
Changed wording of 'Group' in the center aggregate table to 'Device Tag'
Changed 'AP Connection Time' to 'Time Connected as AP' and 'Client Connection Time' to 'Time Connected as Client'
Integrations are now ordered alphabetically
Child IP Devices in Assets are now ordered alphabetically
Bulk editing options are now always shown in the manage page
Improved performance when loading the Asset and IP Device tables in the Manage tab
Indicators are now affected by Asset options the same way that Assets are (e.g. ignore stats setting now affects indicators)
The inclusion of ip device stats when colouring Assets and Indicators is now based on the stat instead of the current 'Ignore Stats' setting of the IP Device
BUG FIXES:
Fixed a bug that caused the 'track asset' button to sometimes fail
Deleted Assets/IP Devices are now properly removed from dashboard item filters
Dashboard tabs now properly disappear after being closed instead of having a delay
Multiple fixes for Dynamic Stats including better bottom draw support, trigger support and map colouring
Fixed a bug that caused text filtering to not properly match up with selections on the manage page tables
Fixed an issue that caused only one filter zone to get movement stats aggregated against it
Fixed a bug that caused the infobox to not always instantly update when you changed site or view
Fixed a bug where creating a new RF Plan for 'radios' with 'all frequencies' selected didn't correctly create all radios
v1.7.6 (2018-09-17)
BUG FIXES:
Fixed KMZ drag and drop onto the map uploading
v1.7.5 (2018-09-05)
CHANGES:
Any existing RF Transmitters with a beam height of over 180 will have their beam height set to 180 (new cap)
BUG FIXES:
Fixed an issue that caused RF Transmitters to not be editable due to having a greater than 180 degree beam height
RF Transmitter Panels no longer enter an invalid state after refreshing the page
Fixed a bug with setting count triggers based on Dynamic Stat string values
Fixed a bug that caused an 'invalid' message to incorrectly be displayed in IP Devices in some cases
Fixed a bug that caused the infobox to not show next hop MAC for unknown MAC addresses
Fixed a bug with only orphaned IP Devices initially appearing in the deleted IP Devices list
Other small tweaks and fixes
v1.7.4 (2018-09-03)
NEW FEATURES:
Some polling system configs can now be edited by users that are members of the configured ims_manager AD group
Added 'Crane', 'Other' and 'Scissor Lift' Asset types
You can now filter by IP Device Type in Heat Maps
The IP Device Type now appears under IP Devices in an Asset's child IP Device list
The camera angle and height associated with a site can now be set
Deleted Assets and IP Devices can now be filtered
CHANGES:
IMPORTANT - RF Planning 'beam' height now has a 0-180 degree range, used for all horizontal directions
Manage page list now offers helpful suggestions to create an Asset/IP Device with a search entry if nothing found
If the 'fly to' button in the Asset panel can't find a location, it now informs you
Substantially improved map performance of Assets to be able to more smoothly handle larger numbers of Assets in IMS
Improved stat loading speed
Visual update to 'Alert History' tab for Triggers
The text case is now shown for email addresses in trigger actions
Improved the aggregation of data where there were inconsistent stat frequencies
BUG FIXES:
Fixed an issue that caused rolled up data to be duplicated in some cases
Fixed an API bug that caused errors when proxying the API through an IIS server
Location stats are now validated more thoroughly to stop invalid latitudes or longitudes being added
Fixed a bug causing inconsistent tooltip behaviour around the app
Fixed issue causing the parent Asset field in IP Device to incorrectly register changes
IMS better handles missing location data in infobox/map
Fixed a bug that caused assets that had been deleted when hidden to continue to count as hidden
Heat map options are now correctly remembered if you dock the panel to the center pane and pop it out again
Fixed a bug that allowed the user to restore invalid IP Devices
Fixed a visual bug with zone selection
Improved the accuracy of RF Planning for .ant files where angles are close to perpendicular to heading
Various other minor tweaks and fixes
v1.7.3 (2018-08-02)
NEW FEATURES:
Manage page Assets can now be filtered by QR Code as well as child IP Device values such as host and MAC Address
Manage page IP Devices can now be filtered by host and QR Code text
CHANGES:
Significantly improved the performance of zones in the front end
If not specified, terrain now defaults to Cesium World Terrain instead of STK World Terrain
Improved error quality for RF Planning
Small style/text fixes
BUG FIXES:
Fixed a bug that caused Heat Maps to not display in the northern hemisphere
Added back the missing auto-refresh icon on activity log
Fixed a bug that caused newly added dashboard items on an unlocked report dashboard to be locked
Fixed a bug that caused dashboard items using incomplete Radio Stat data over more than a day to not correctly aggregate some fields
Fixed an issue where RF Transmitter panels could think that they had been edited when they had not been
v1.7.2 (2018-07-26)
NEW FEATURES:
Parent Asset can now be selected from the IP Device
Dashboards that are used in reports now need to be 'unlocked' to edit (button will appear in top right)
Cesium Ion imagery layers are now supported
Integrations can now be bulk updated
TX Power is now able to be viewed in map bottom draw charts and dashboard items (if data available)
A QR Code scanning feature is now available in IMS (disabled by default)
Added Valve, Rotable and Scaffolding Asset Types (hidden by default)
Added support for an ArcGIS auth token for ArcGIS map layers
CHANGES:
Reduced stuttering when IMS is loading map data
Improved bulk update performance by several times
Improved performance of large table dashboard items (fixed poor responsiveness when editing table config)
Infobox now displays data to two decimal places for Dynamic Stat views & Infrastructure view
BUG FIXES:
Fixed an issue that could cause incorrect bulk tag modifications
An IP Address, MAC Address or Host is now properly required when creating an IP Device
Fixed an issue that caused deleted dashboard tabs to not disappear from the list until page reload
Other minor fixes
v1.7.1 (2018-07-02)
NEW FEATURES:
Added CPU load average and normalised CPU load average to hardware statistics
Added colouring to movement stat dashboard items
When opening a trigger the last tripped value is now displayed by default
BUG FIXES:
Fixed issue where triggers could be automatically enabled after the upgrade
Fixed an issue that occasionally caused a double-up of dashboard items in a dashboard tab
Fixed an issue that made a ticket unable to be edited
Fixed regression that stopped deleted Assets and IP Devices from being opened/edited
Fixed a naming issue that caused report csv files to not be able to be extracted/opened
Fixed an issue that occasionally allowed multiple confirmation modals to be opened
Fixed an issue that occasionally made the user button in the top bar stop responding
Fixed colouring when dragging an IP Device over an IP Device list inside of an Asset
Fixed issue where 'show labels for immobile' wouldn't show labels for all immobile assets
Other small fixes
CHANGES:
Added 2 week and 4 week time slice options to dashboard items
Added further data validation to API
Added detailed error when attempting to restore an IP Device or Asset with a duplicate name/IP/MAC
Improved detail in other errors around the app
Closing an edited Asset or IP Device will now prompt you to discard changes
Tweaked size/style of a few UI elements
v1.7.0 (2018-06-15)
NEW FEATURES:
MAJOR: Reports - this allows you to periodically email out a dashboard to a list of email addresses
MAJOR: Trigger/alert history - This allows you to see at a glance if/when a trigger was alerting in the past
MAJOR: Movement stats - This allows you to see estimated distance and speed for all Assets, and also allows storing movement stats by the new 'Filter Zone' if you wish
MAJOR: New 'host' field in IP Devices. Setting this field will allow auto-configuring the IP field
Bulk update and delete of Assets and IP Devices in the manage page
Added comments to triggers
Improved map layers panel allows easy re-ordering and toggling of layers
Improved Heat Maps now allow filtering by selected or hidden Assets, and by ignored stats
IMS backend can now be split between multiple servers to poll different sites or systems independently
'Fly to' button added for Assets that will show you where the asset is on the map
Added various new options for dashboard items
Added 'SNR' to infobox, map and charts
The data from any dashboard item can now be downloaded as a CSV file
Known MAC Addresses and IP Addresses are now hyperlinked to an IP Device in Alert data and IP Device Log screens
Added ability for users to change their passwords where LDAP Auth isn't used
Added two new asset types: pump and radar
Many other small tweaks
BUG FIXES:
Filter for creating RF Transmitters per-radio matches on IP Device Type 'AND' Asset Type, instead of 'OR'
Fixed a bug where a deleted asset wouldn't always get removed from the quicklist
Fixed filter by process where there are multiple process names entered
Guest mode can now be used with LDAP read/write group access restriction
Fixed issue causing poor performance when loading data from the Activity Log
Many other small fixes
CHANGES:
If there's a conflicting name or IP Address when adding/editing an Asset or IP Device, the conflicting object will be named
Increased max Asset name length to 128 characters
Search box in dashboard item filter settings can search by IP, MAC, type and several other new options
Manage page performance is now substantially improved and can smoothly handle thousands of Assets or IP Devices
The color of the text for the group (eg. asset) in dashboard tables now matches the colour of the group in charts
IMS server backend now requires less CPU under normal operation
Improved consistency of save/close buttons in assets, ip devices, triggers, tickets and reports
Improved error messages app-wide
Improved tours and help
Added aggregation type (eg avg, sum, min, max, etc) to dashboard item heading
Many other small tweaks
OTHER:
Dynamic Stats and IMSQL have been added to IMS. These features allow FTP Technologies to add highly specific customised
dashboard items, triggers, or data to IMS to solve user-specific requirements
v1.6.3 (2018-03-07)
NEW FEATURES:
The text colour of dashboard status items automatically adjusts to be most visible depending on the status item color
BUG FIXES:
Fixed a bug that caused occasional flickering in connection lines
Fixed a bug where ticket update emails would be sent twice
Fixed a bug that occasionally caused the selected map layer to not be loaded
Selected connection now properly displays in top bar
IP Device Monitor IP validation now works correctly
CHANGES:
If closing an Asset or IP Device with unsaved changes you will now be asked for confirmation
When creating an RF Plan 'per radio', Asset Types and IP Device Types radios are created for the intersection of the two options
Added IP Device Type as a dashboard filter/group option for connection time, connection distance, and unique clients
Charts in the bottom panel now take the 'Include Ignored Stats' Asset map option into account
v1.6.2 (2018-01-29)
BUG FIXES:
Fixed a bug in dashboard chart calculations when more than one tag is assigned to an asset or IP device
Undo / redo filter configuration fixed for activity log and device log
Fixed activity and device log load more and load less buttons
Fixed camera overview and camera popup styling
Several other minor styling issues
NEW FEATURES:
On-click RF planning returns for RF Planning 2.0
v1.6.1 (2018-01-16)
BUG FIXES:
Activity log correctly allows more items to be displayed
Device log correctly allows more items to be displayed
Activity log doesn't lose filters
Fixed minor styling bug in Activity log with Chrome 64
CHANGES:
Alerts are now sorted by last updated instead of tripped at time
v1.6.0 (2018-01-08)
NEW FEATURES:
MAJOR: RF Planning 2.0 - new RF Planning from the ground up
MAJOR: Dashboard tabs are now stored against the user and can be shared and hidden
MAJOR: New Top bar with simpler site/view selection and app state info (comments, alerts)
MAJOR: New connections system - you can now choose display options for connections such as visible radios
MAJOR: New tour and information help buttons around the app as well as searchable help in the top bar
MAJOR: Completely new colouring system for Assets. They are now coloured by mean, max, min, mode or median of all IP Devices in the Asset instead of one 'primary' IP Device
Comment counts are now displayed on manage page
The dashboard item legend is now resizeable
URL now stores open panels (can link to asset, ip device, etc)
New utility bar on overview pages to allow simpler filtering and standardised buttons
Dashboard item legend can now be included in the print view
The priority of tickets is now correctly set when created by a trigger action
Added the Critical P1 priority for Triggers/Alerts
Share link now shares open alerts, tickets, triggers, assets, ip devices and rf transmitters
Added new 'time slices' setting to dashboard items
CHANGES:
Toasts no longer periodically pop up for active alerts
Center panels have been restructured and have new icons
Moved center collapse button from the bottom to the edges of the center pane
Substantially improved zone performance
Improved asset and ip device conflict resolution
Updated dashboard items to have a horizontal button list instead of vertical
Improved visual consistency of overview tabs
Moved incident, trigger and alert filter boxes from individual panels to the utility bar for a simpler search
Far radio information is showed under more circumstances for selected connections
Timeline playback speed option is now a pop-up selector
Colouring by IP Device AP or Asset AP now colours mobile devices by the AP they are connected to, and immobile devices by their own AP
It is now clearer which data page is being displayed in dashboard items
Clearer saved/unsaved/changed indication app-wide
Double-clicking zones now flies the camera to them the same as with Assets
More filters added to Incidents
Removed lock button from panels
Many other minor changes and tweaks
You are now prompted to add a new tag if saving an asset/ip device with an unsaved tag name
Alerts now show timezone and a more detailed breakdown of timestamps in some cases
BUG FIXES:
Exported dashboard tables are now correctly filtered
Context menu displays lat, lon instead of lon, lat
Fixed an issue with file attachments not always uploading properly
Fixed an issue with sharing your view when tracking an asset
Fixed an occasional issue with denied write access when the api and frontend are on the same port
Fixed an issue where assets weren't properly hidden in the Infrastructure view
Many other minor bug fixes and tweaks
v1.5.1 (2017-08-22)
NEW FEATURES:
Next hop connection lines now increase in width when an Asset is selected
Downstream connection lines are now highlighted when an Asset is selected
Added pagination to legend for charts to improve performance
Added auto-refresh to Activity and Device Log tabs
Added asset location (lat,lon) to Infobox
Added colour by Connected Asset option to Heat Maps
Added colour by Asset to 'color assets by' Map Options
CHANGES:
Asset types and IP Device types are now sorted alphabetically in manage page
Minor style tweaks and text changes
BUG FIXES:
Fixed bug with automatically handling server/client time offset in frontend
Fixed issue with downloading files uploaded to comments
Fixed issue where duplicate comment panels could be opened
Fixed issue where custom selected datetime would not be displayed when re-opening chart settings
Fixed issue where chart heading wouldn't always update on changes
Other minor bug fixes
v1.5.0 (2017-08-11)
NEW FEATURES:
MAJOR: Added IP Device indicators to map view
MAJOR: Added a legend to charts with the ability to toggle visibility of items, and remember it
MAJOR: Added Device Log viewer module support
Manage page has a new table view with sort & filter options to provide a better overview of Assets and IP Devices
Dashboard tables now have a button to expand to size of content to make printing easier
Dashboard tables, Assets, and IP Devices now support CSV export
Dashboard items now support setting custom start times and end times
Dashboard charts now have set colours and orders for group items
Dashboard charts now allow filtering active/inactive radio stats
Quicklist is now persistent (remembers hidden/shown & expanded/collapsed state of Assets and Zones)
Quicklist now has IP Device Tag group option
Quicklist now shows the number of hidden Assets/Zones
Map Layers now support prefix proxies
Map now supports dragging KML/KMZ files onto it to load them
RF Planning now has configurable RSSI cutoffs
URL now stores what page/tab you are on with back/forwards button support
CHANGES:
Map Options are now remembered between refreshes
Share view button now shares what tab/page of the application you are on
Updated dashboard table item style
Various style and polish tweaks around the application
API error responses are standardised and should always be json
Many small tweaks and changes to styles, text and presentation
Changed wording of 'show offline' to be 'show not polled' as it is more accurate
BUG FIXES:
Can now delete IP Devices that don't have IP Addresses
Made dashboard max panel height infinite - fixes display issues for large monitors
Fixed rare crash caused by selecting invalid view option
Fixed issue with API Docs (/api/docs) not loading properly
Fixed display issues with some trigger conditions
Some compatibility fixes for Chrome 51 & Chrome 60
Many small bug fixes
v1.4.0 (2017-06-21)
NEW FEATURES:
MAJOR: New more powerful triggers & alerting system with advanced filtering, geofences and count triggers
MAJOR: New comments system with ability to attach images and files
Deleted IP Devices and Assets can now be restored
New pane-based incidents UI with notification email options
New "Connected AP" Heat Map coloured by the ip device that an asset was connected to - select 'IP Device' in asset colouring to see the corresponding IP Device colours
New Tx/Rx Rate Heat Map and asset colouring options
CHANGES:
Improved Heat Maps with aggregation type option (min, max, avg)
Improved charts with better performance and better display of data
Total utilisation now shows you the cumulative total for the time period
Minor text and style tweaks around the app
Made tags case-insensitive when checking for duplicates
BUG FIXES:
Fixed a bug with accuracy of context menu's lat/lon display
Fixed infobox not toggling orientation
Fixed formatting issue with printing charts
Many other bug fixes
v1.3.1 (2017-05-18)
NEW FEATURES:
Added total throughput (utilisation) and client/ap distance data sources to dashboard
Alerts now display the full timestamp and allow 'jumping' to the timestamp
Added indicator shadow when creating ignore stat zones
CHANGES:
Tweaked activity log text for clarity
Changed central datetime picker to 24h time to fit in with the rest of the app
Improved performance of panels
Minor text and style tweaks around the app
BUG FIXES:
Fixed infrastructure view
Fixed bug where comments and other activities were incorrectly ordered in activities tab
Fixed bug where closed/silenced alerts would stop displaying their alert data
v1.3.0 (2017-05-09)
NEW FEATURES:
MAJOR: A new feature "Integrations" has been added. This allows individual pollers to be enabled/disabled via the Manage page for IP Devices and Assets.
MAJOR: Overhauled activity tab that stores a full audit log application-wide
Re-enabled Connections Charts, with some tweaks
New manage page panel-based editable Assets and IP Devices with conflict warning and automatic change merging
New split pane view for map and overview pages
Server/client time offset is automatically accounted for in frontend
Site now changes on double-click of map site icon
CHANGES:
Left and right panel areas have been replaced with a single overlaid panel area
Quicklist is now alphabetically ordered
Improved dashboard tables
General UI improvements
Several code optimisations
BUG FIXES:
Scroll through earth bug has been fixed
Many other minor bug fixes
v1.2.6 (2017-03-02)
General bug fixes & performance improvements
Added hotkeys (+/-) and buttons for zooming in and out of the map
Added advanced settings for RF Planning
Minor text fixes
v1.2.4 (2017-02-21)
Fixed an issue where no error description would be displayed when an asset/ip device failed to update
v1.2.3 (2017-02-21)
Fixed a memory leak
API: Fixed a rare issue that could cause a build-up of long running queries
A few other minor bug fixes
v1.2.1 (2017-02-14)
Minor bug fix with visual height of assets
v1.2.0 (2017-02-14)
Large number of general bug fixes, UI tweaks and performance improvements
Enhancements:
Various performance improvements such as stat loading and processing
New Heat Map generator - now supports large distributed sites
Improved chart performance substantially (especially on mouseover)
Triggers can now be grouped and filtered by Asset Tag and IP Device Tag
Tags are now taking over the functionality of IP device functions.
- New tags have been created with the same names as the old functions and accordingly assigned to IP devices.
- Aggregate table is now based on groupings by a special list of ip device tags.
- Dashboard items can no longer be grouped or filtered by functions.
Use grouping and filtering by IP device tags for equivalent functionality.
- When editing IP devices you can no longer set the ip devices function. Users should add tags instead.
Updated tickets with improved filtering and the ability to assign tickets to users
New Features:
New 'Activity' tab that displays comment and ticket activity. You can now easily interact with discussions throughout the IMS
Experimental Microsoft Edge compatibility (EdgeHTML v14.14393 and later)
Note:
Changed option 'Force always poll' to 'Poll even when offline' for IP device configuration. The behaviour remains the same.
v1.1.16 (2017-01-12)
Minor bug fixes
v1.1.15 (2017-01-12)
Minor bug fixes
v1.1.14 (2017-01-12)
Added show/hide all buttons to quicklist
Added grouping options to quicklist (such as group by tag)
Ability to display info boxes vertically (old way) or horizontally to compare multiple assets side-by-side
v1.1.13 (2017-01-12)
Fixed loading data for server with time set in the future
v1.1.12 (2017-01-09)
Minor bug fixes
v1.1.11 (2017-01-09)
New stream data loading system for timebar
Selections now bold in quicklist
Improved alerts, triggers and incidents
Many other bug fixes and improvements
v1.1.8 - v1.1.10
Tweaks and bug fixes
v1.1.7 (2016-12-19)
Added chart filter by name
Updated context menu
Added zone selection indicator
Added closed alerts section
Changed acknowledged alerts to not re-trigger
Added ability to snooze alerts
Added measuring tool
Added compass
Added scale
Added ability for front-end to auto-configure its API IP
Added tags to Assets and IP Devices
Added ability to use tags for filtering and grouping data in dashboard items, e.g. charts.
Added forward and back navigation to dashboard charts/status views/tables
More subtle logos and credits along bottom of map
Various bug fixes
v1.1.6 (2016-11-22)
Last version before changelog